if you have a seat belt emulator then inside the emulator you will find one switch. If the seat belt warning is still turned on after connecting the emulator then turn off the ignition, open the back of the emulator and change the switch setting according to the information below: The seat belt emulator has a switch hidden inside. In case the unfastened seat belt warning light or sound is still present after connecting the emulator Then insert the seat belt emulator's wires in their place. Using a small screwdriver, push the pins in holes and remove the seat belt's wires. Remove the seat belt connector (black and red wires).ĥ. Find a big yellow connector box under the seat.Ĥ. Location of the seat belt connector for following cars:Ģ. Insert the connector back into the original position and lock the yellow connector.Ģ. Then insert the seat belt emulator's wires in their place.Ħ. Using a small screwdriver, push the pins in the holes and remove the seat belt's wires (black and red). Remove the 'L' shaped connector by sliding it to the left.ĥ. Find a big yellow connector under the seat.Ĥ. Take a look at the installation video: CLICK HEREĢ. Location of the seat belt connector for following cars: BMW seat belt buckle emulator - installation instructionĬlick on the car model to read the correct instruction
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |